Availability: | |
---|---|
Quantity: | |
FZW28-12 11kV 12kV Pole Mounted High Voltage Vacuum Load Break Switch
FZW28-12 column high voltage AC vacuum load switch is used in the column installation, with manual and electric operation functions, the switch body is optimized on the basis of Japan Toshiba VSP5-12, and more suitable for my country's distribution network Requirements, this switch is a maintenance-free load switch, using vacuum arc and SF6 gases, and phase insulation medium. Suitable for the responsibility of the 10KV distribution line user entry, it is also possible to apply to the required branch line connection.
Use environment
Name | unit | Environmental value | |
Amazing air temperature | Maximum temperature | ℃ | +50 |
Minimum temperature | -20 | ||
Maximum temperature difference | K | 30 | |
altitude | m | ≤3000 | |
Solar radiation intensity | W / cm2 | 0.1 | |
Contamination | Ⅳ | ||
Ice thickness | mm | 10 | |
humidity | Daily relative humidity average | % | ≤100 |
Monthly relative humidity average | ≤95 | ||
Tolerate earthquake | 度 | ≤8 |
Note: Environmental parameters are exceeded in the previous table, please contact us.
FZW28-12 11kV 12kV Pole Mounted High Voltage Vacuum Load Break Switch
FZW28-12 column high voltage AC vacuum load switch is used in the column installation, with manual and electric operation functions, the switch body is optimized on the basis of Japan Toshiba VSP5-12, and more suitable for my country's distribution network Requirements, this switch is a maintenance-free load switch, using vacuum arc and SF6 gases, and phase insulation medium. Suitable for the responsibility of the 10KV distribution line user entry, it is also possible to apply to the required branch line connection.
Use environment
Name | unit | Environmental value | |
Amazing air temperature | Maximum temperature | ℃ | +50 |
Minimum temperature | -20 | ||
Maximum temperature difference | K | 30 | |
altitude | m | ≤3000 | |
Solar radiation intensity | W / cm2 | 0.1 | |
Contamination | Ⅳ | ||
Ice thickness | mm | 10 | |
humidity | Daily relative humidity average | % | ≤100 |
Monthly relative humidity average | ≤95 | ||
Tolerate earthquake | 度 | ≤8 |
Note: Environmental parameters are exceeded in the previous table, please contact us.
Rated voltage | KV | 12 |
Rated current | A | 630 |
CT parameters | Customized according to customer requirements | |
Rated frequency | Hz | 50 |
Rated short (1min) power frequency tolerance voltage (on ground / broken) | KV | 42/48 |
Rated lightning impact tolerance voltage (on ground / broken) | KV | 75/85 |
Rated short-circuitry current (peak) | ka | 50 |
Rated short-term resistance (4S) | ka | 20 |
Rated peak tolerance | ka | 50 |
Rated short-circuit current break | 次 | 30 |
Operating agency | spring | |
Vacuum circuit breaker mechanical life | 次 | 10000 |
Enclosure rating | IP67 | |
Annual leaf rate | % | <0.01 |
Note: Technical parameters exceed the scope of the previous table, please contact us
Rated voltage | KV | 12 |
Rated current | A | 630 |
CT parameters | Customized according to customer requirements | |
Rated frequency | Hz | 50 |
Rated short (1min) power frequency tolerance voltage (on ground / broken) | KV | 42/48 |
Rated lightning impact tolerance voltage (on ground / broken) | KV | 75/85 |
Rated short-circuitry current (peak) | ka | 50 |
Rated short-term resistance (4S) | ka | 20 |
Rated peak tolerance | ka | 50 |
Rated short-circuit current break | 次 | 30 |
Operating agency | spring | |
Vacuum circuit breaker mechanical life | 次 | 10000 |
Enclosure rating | IP67 | |
Annual leaf rate | % | <0.01 |
Note: Technical parameters exceed the scope of the previous table, please contact us
The switch is sealed in a full insulation, a full sealing structure, a high pressure portion, a low voltage control loop, and an operating mechanism, and the inside of the box is charged in the case, and the switch main circuit leads the terminal with insulation cable protection. |
The operating mechanism combines the spring energy storage mechanism and the electromagnetic mechanism of the free trip device, enabling the device with manual / automatic operation, and more flexible switching operations. And guarantees that the switch is reliable in the absence of the pressure. |
The switch is installed in a suspension or a seat, making it more convenient and flexible on the pole. |
The switch has a control interface for distribution automation. Fial of the feed line automation function can be achieved after installing the intelligent control box. |
The switch is sealed in a full insulation, a full sealing structure, a high pressure portion, a low voltage control loop, and an operating mechanism, and the inside of the box is charged in the case, and the switch main circuit leads the terminal with insulation cable protection. |
The operating mechanism combines the spring energy storage mechanism and the electromagnetic mechanism of the free trip device, enabling the device with manual / automatic operation, and more flexible switching operations. And guarantees that the switch is reliable in the absence of the pressure. |
The switch is installed in a suspension or a seat, making it more convenient and flexible on the pole. |
The switch has a control interface for distribution automation. Fial of the feed line automation function can be achieved after installing the intelligent control box. |
Copyright © ️ 2021 New Concept Electric Inc. Technical Support:Focus leader 京ICP證000000号